How to connect the readyMax 2 Display to your readyMax 2
You can either plug your readyMax 2 Display directly into your readyMax 2 or connect the two devices using the included USB-C cable. Connecting the display with the USB-C cable allows you to position the display anywhere around your readyMax 2.
Option 1: Plug the readyMax 2 Display directly into the readyMax 2
Insert the stand attached to the back of the readyMax 2 Display directly into the designated slot on the customers-facing side of your readyMax 2. Wait a few seconds until the display boots up automatically.
Option 2: Connect the readyMax 2 Display to the readyMax 2 using a USB-C cable
There's a USB-C port on the inside of the stand on the readyMax 2 display. You can plug one end of the included USB-C cable into this port and connect it to the bottom of the readyMax 2. Once you've connected both devices, wait a few seconds for the display to boot up.
The device manufacturer recommends that only the supplied USB-C cable be used for the connection.
